Concrete in Reno: get matched with a local pro
Driveways, patios, walkways, steps, slabs, stamped finishes, sealing and repairs. Tell us about your concrete project and an independent local pro gets in touch. The pages below explain Reno freeze-thaw issues and permits.
Get matched Takes about a minute.
Concrete services
Driveways
New and replacement driveways.
Patios
Poured patios and extensions.
Stamped & decorative
Stamped, colored, exposed aggregate.
Repair & resurfacing
Cracks, scaling, overlays.
Walkways & steps
Paths, steps and landings.
Slabs & pads
Shed, RV and hot tub pads.
Approaches & curb cuts
Work in the public right-of-way.
Reno winters and concrete
Reno sees freezing nights every winter (NWS Reno). Freeze-thaw cycles and deicing chemicals are hard on concrete. FHWA says air entrainment improves freeze-thaw durability (FHWA), and NRMCA connects surface scaling to deicers and to finishing and curing practices (NRMCA). See why Reno concrete cracks and scales.
Permits: flatwork vs. curb cuts
In unincorporated Washoe County, patios, sidewalks and driveways no more than 30 inches above grade, without foundations and not over a septic system or basement, are on the permit-exempt list (Washoe County). Whether the City of Reno exempts the same flatwork isn't confirmed, so your contractor checks. Any work in the City of Reno right-of-way, like curb cuts and driveway approaches, needs a Public Works Encroachment/Excavation permit (City of Reno).
How a concrete project usually goes
- Request and site visit: the pro measures, checks grade and drainage, and asks how you'll use the slab.
- Written bid: thickness, base, reinforcement, finish, joints, mix and who handles permits.
- Demo and base: old concrete broken out and hauled, base graded and compacted, forms set.
- Pour and finish: placed, screeded, floated and finished, with control joints cut or tooled.
- Cure: kept moist or sealed with curing compound, then kept off until the pro says it's ready.
Mix and curing basics for Reno
NRMCA's guidance on scaling says concrete exposed to freezing and thawing must be air-entrained: 6 to 7 percent air for severe exposure with 3/4-inch or 1-inch aggregate, and 4 to 6 percent where deicing salts won't be used. It suggests about 3,500 psi strength for freeze-thaw exposure and 4,000 psi when deicers are used (NRMCA CIP 2).
Curing matters just as much. NRMCA recommends a liquid membrane curing compound or wet burlap, and warns against finishing while bleed water is on the surface. Ask your contractor how they'll handle both.
What affects the price
We don't quote prices; the pro who visits sets the price. These are the things that usually move a bid:
- Square footage and thickness
- Demolition and haul-off of old concrete
- Base prep, grading and access for trucks
- Finish: broom, stamped, colored or exposed aggregate
- Steps, curbs and permits
Frequently asked questions
Do I need a permit for a driveway?
It depends on where you live. Washoe County exempts some low flatwork. Any curb cut or approach in Reno's right-of-way needs an encroachment permit.
Concrete or asphalt?
We match concrete jobs. Our pavers vs. concrete guide compares the options we cover.
Why is my concrete scaling?
Often deicers, freeze-thaw cycles, or how the concrete was finished and cured. NRMCA's guidance covers the causes.
Ready to get matched?
Pick what you need and leave your contact info. An independent local pro gets in touch.
Related services and guides
Service areas
Sources
Checked November 2026. Rules change; confirm with the source.