Why Reno concrete cracks and scales in winter
Reno gets freezing nights every winter. Water in concrete freezes and expands, and repeated cycles plus deicing chemicals can crack and flake the surface. Air-entrained concrete, proper finishing and curing, and going easy on deicers all help.
Get matched Takes about a minute.
Freeze-thaw, simply
Concrete has tiny pores. When water in them freezes, it expands and pushes on the concrete. Entrained air creates tiny bubbles that relieve that pressure, which is why FHWA says air entrainment improves freeze-thaw durability (FHWA). The NWS Reno climate records show sub-freezing temperatures are a normal part of winter here (NWS Reno).
Deicers
FHWA's technical brief on chemical deicers explains how they can damage concrete, physically and chemically (FHWA). NRMCA advises against using deicers on concrete in its first winter (NRMCA).
Scaling
Scaling is flaking of the top surface. NRMCA ties it to freeze-thaw with deicers, non-air-entrained concrete, and finishing or curing problems such as finishing while bleed water is on the surface (NRMCA).
What to ask your concrete contractor
- Will the mix be air-entrained for exterior flatwork?
- How will you cure the slab?
- Where will control joints go?
- When can it take deicers, if ever?
Repair options
Light scaling can often be resurfaced. Deep damage or structural cracks may mean replacing sections. See concrete repair.
The numbers NRMCA gives
NRMCA's guidance on scaling recommends 6 to 7 percent air in freshly mixed concrete for severe exposure with 3/4-inch or 1-inch aggregate, and 4 to 6 percent where deicing salts won't be used. It suggests about 3,500 psi strength for freeze-thaw exposure and 4,000 psi where deicers are used (NRMCA).
Finishing and curing mistakes
- Finishing while bleed water is on the surface weakens the top layer.
- Overworking the surface reduces air content in the top layer.
- Skipping curing leaves a weak surface skin.
NRMCA recommends a liquid membrane curing compound or wet burlap, and delaying finishing until bleed water has risen and disappeared (NRMCA).
Living with it
- No deicing salts in the first year; use clean sand.
- Hose off salt that cars bring onto new slabs.
- Never use ammonium sulfate or ammonium nitrate as a deicer; NRMCA notes these are in many fertilizers too.
- Fix drainage so water and salt don't stand on the surface.
Frequently asked questions
Should I salt new concrete?
NRMCA advises against deicers on new concrete during its first winter. Use sand for traction instead, if needed.
Can scaling be fixed?
Often, with resurfacing, if the slab underneath is sound. See concrete repair and resurfacing.
Why does my sidewalk scale near the lawn?
Fertilizers that contain ammonium sulfate or ammonium nitrate can cause scaling, NRMCA says (NRMCA). Keep spreader overthrow off concrete.
Ready to get matched?
Pick what you need and leave your contact info. An independent local pro gets in touch.
Related pages
Sources
Checked November 2026. Rules change; confirm with the source.