Concrete driveways in Reno
A new or replacement concrete driveway has to handle Reno's freeze-thaw winters, deicers and plows. Here's what to ask about, the permit basics, and a quick way to get matched.
Get matched Takes about a minute.
What a driveway job includes
- Break out and haul away the old driveway, if there is one.
- Grade and compact the base so water drains toward the street, not the garage.
- Set forms and any reinforcement.
- Pour, finish and tool or cut control joints.
- Cure, then keep cars off until the pro gives the go-ahead.
Freeze-thaw details to ask about
- Air entrainment. FHWA says entrained air improves concrete's resistance to freeze-thaw damage (FHWA).
- Curing. NRMCA ties scaling to finishing and curing practices (NRMCA). Ask how the slab will be cured.
- Joints. Control joints guide where cracks form. Ask about spacing.
- First winter. NRMCA advises against deicers on new concrete in its first winter.
Replacing an old driveway
If the approach at the street changes, the right-of-way permit applies. See driveway approaches and curb cuts.
Permits
Unincorporated Washoe County exempts driveways no more than 30 inches above grade, without foundations and not over a septic system (Washoe County). Inside Reno city limits, your contractor confirms what's needed. Curb and right-of-way work needs the encroachment permit.
Concrete or pavers?
Compare them in pavers vs. concrete or see paver driveways.
Mix specs worth asking about
NRMCA's guidance on scaling says concrete exposed to freezing and thawing must be air-entrained: 6 to 7 percent air for severe exposure with 3/4-inch or 1-inch aggregate, and 4 to 6 percent where deicing salts won't be used. It suggests about 3,500 psi strength for freeze-thaw exposure and 4,000 psi when deicers are used (NRMCA CIP 2).
The first winter
NRMCA says not to use deicing salts in the first year after placing concrete, to use clean sand for traction, and to hose off salt that cars drip onto new driveways and garage slabs when conditions allow (NRMCA). It also notes a sealer can help, applied when the concrete is reasonably dry, with late summer the ideal time.
What affects the price
We don't quote prices; the pro who visits sets the price. These are the things that usually move a bid:
- Size and thickness
- Demo and haul-off
- Base work and slope
- Finish and color
- Approach or curb work at the street, which needs a City permit in Reno (City of Reno)
Questions to ask your contractor
- Will the mix be air-entrained?
- How thick is the slab, and what base goes under it?
- Where will control joints go?
- Does the job touch the curb or sidewalk, and who pulls that permit?
Frequently asked questions
Do I need a permit for a driveway?
Curb cuts and approaches in Reno's right-of-way need an encroachment permit. Washoe County exempts some low flatwork. Your contractor confirms for your address.
Concrete or pavers for a driveway?
Both work. Our comparison guide covers the tradeoffs.
When can I drive on a new concrete driveway?
Ask your contractor; it depends on the mix and weather. For cold weather, NRMCA says the concrete itself should be at least 50°F (NRMCA), so ask how they'll protect a new pour during a cold snap.
Should I seal a new driveway?
NRMCA says a sealer can help protect against scaling, applied once the concrete is reasonably dry, and late summer is the ideal time (NRMCA).
Ready to get matched?
Pick what you need and leave your contact info. An independent local pro gets in touch.
Related services and guides
Service areas
Sources
Checked November 2026. Rules change; confirm with the source.