Sprinkler and drip repair in Reno
Broken heads, stuck valves, leaks and dry patches are the usual sprinkler problems in Reno yards. Tell us about yours and a local pro who handles irrigation gets in touch.
Get matched Takes about a minute.
Common problems
- Broken or tilted heads from mowers, cars or snow
- Valves that won't shut off or won't open
- Wet spots or soggy ground that point to a buried leak
- Dry patches from clogged nozzles or poor coverage
- Controller faults after a power outage
- Cracked parts from freezing when a system wasn't drained in fall
Testing on the right day
If you're a TMWA customer, run sprinklers on your assigned days: even addresses Tuesday, Thursday and Saturday; odd addresses Wednesday, Friday and Sunday. No sprinklers on Mondays, and none from 11 a.m. to 7 p.m. between Memorial Day and Labor Day (TMWA). Ask your contractor how they handle test runs.
Think you have a leak you can't find? TMWA's conservation team offers water use reviews (TMWA).
How a repair visit usually goes
- Run each zone from the controller and watch for broken heads, geysers, weak pressure and dry spots.
- Check valves for leaks or sticking, and the controller for wiring or programming problems.
- Dig out and replace broken heads, fittings or pipe.
- Adjust heads for coverage and reset the controller to your watering days.
Reno-specific causes
- Freeze damage: lines that weren't blown out in fall can crack. Spring start-up is when it shows. See winterization.
- Snow and plows: heads along driveways and curbs get hit.
- Hard, alkaline water and soil: UNR Extension notes most northern Nevada soils are alkaline (UNR Extension). Ask how nozzles and drip emitters will be checked for buildup.
What affects the price
We don't quote prices; the pro who visits sets the price. These are the things that usually move a bid:
- Number of zones and how many need work
- Whether a leak is easy to find or buried
- Valve or controller replacement versus simple head repairs
- Backflow device repairs
Questions to ask your contractor
- Is the problem a repair, or does the zone need rework?
- Does the job touch the backflow device or the house water connection?
- Will you check the controller schedule against my TMWA days?
Frequently asked questions
How do I spot a sprinkler leak?
Look for soggy spots, water running when the system is off, or a higher bill. TMWA's conservation team can help you look for water waste.
What days can I test sprinklers?
Your TMWA assigned days, set by the last digit of your address. Not Mondays, and not midday in summer.
Why is one zone not turning on?
Common causes are a bad valve solenoid, a wiring break or a controller setting. A pro tests each one in turn.
Should I repair or replace an old system?
If repairs keep coming back, ask for a quote on both. Converting beds to drip during repairs is a common middle path.
Ready to get matched?
Pick what you need and leave your contact info. An independent local pro gets in touch.
Related services and guides
Service areas
Sources
Checked November 2026. Rules change; confirm with the source.