Stamped and decorative concrete in Reno

Stamped, colored and exposed-aggregate concrete gives a patio or walkway the look of stone or pavers. In Reno, sealing and winter care decide how long it looks good.

Get matched Takes about a minute.

Finish options

  • Stamped: patterned to look like stone, brick or wood.
  • Colored: integral color or surface color.
  • Exposed aggregate: the surface is washed to show the stone in the mix.
  • Broom finish: plain, textured, common on driveways and walks.

Winter care

NRMCA's guidance on scaling warns about deicers, especially on concrete in its first year (NRMCA). Ask your contractor about texture for snowy walks, and how often the surface should be resealed.

Resealing

Decorative concrete is usually sealed. Ask your installer what sealer they used and when to reapply.

How stamped concrete is made

  1. Base and forms, like any slab.
  2. Pour with integral color, or broadcast color on the surface.
  3. Release agent applied, then stamp mats pressed in while the concrete is workable.
  4. Joints cut, surface cleaned, and sealer applied once cured.

Reno-specific care

NRMCA advises against deicing salts in the first year and recommends hosing off salt that cars bring onto new slabs (NRMCA). It also says never use ammonium sulfate or ammonium nitrate as a deicer, and notes these chemicals are in many fertilizers, so keep lawn fertilizer off decorative concrete. NRMCA names late summer as the ideal time to apply a sealer.

What affects the price

We don't quote prices; the pro who visits sets the price. These are the things that usually move a bid:

  • Square footage
  • Pattern complexity and number of colors
  • Borders and bands
  • Sealer type
  • Removal of old concrete

Questions to ask your contractor

  • How slippery will this finish be when wet or icy?
  • What sealer do you use, and how often should it be redone?
  • Can you show finished work of the same pattern?

Frequently asked questions

Is stamped concrete slippery in snow?

It depends on the pattern, texture and sealer. Ask the contractor about slip resistance for your use.

Who reseals stamped concrete?

Usually a concrete contractor or a sealing specialist. Ask what sealer was used before, since some don't mix.

How often does stamped concrete need resealing?

It depends on the sealer, sun and traffic. Ask your installer what they used and when they recommend recoating.

Ready to get matched?

Pick what you need and leave your contact info. An independent local pro gets in touch.

Related services and guides

Service areas

Sources

Checked November 2026. Rules change; confirm with the source.

  1. NRMCA, CIP 2: Scaling Concrete Surfaces (PDF)
Get matched