Concrete repair and resurfacing in Reno
Cracks, scaling and sunken slabs are common after Reno winters. Some can be repaired or resurfaced; others need replacing. Here's how to tell, and a quick way to get matched.
Get matched Takes about a minute.
Scaling, cracking or settling?
| Problem | What it looks like | Common causes |
|---|---|---|
| Scaling | Flaking surface | Freeze-thaw, deicers, finishing and curing (NRMCA) |
| Cracking | Lines through the slab | Shrinkage, joints too far apart, base movement |
| Settling | Sunken or tilted slab | Soft or washed-out base |
Repair or replace?
Surface scaling can often be resurfaced. Wide cracks, heaving or sunken sections may need sections replaced. A contractor should explain why they recommend one over the other.
Why Reno concrete takes a beating
FHWA has published technical guidance on how chemical deicers interact with concrete (FHWA). With freezing nights each winter, older non-air-entrained concrete is more vulnerable (FHWA). See freeze-thaw and concrete.
Leveling sunken slabs
A slab that has sunk but isn't badly cracked can sometimes be raised instead of replaced, with mudjacking or foam leveling. Ask the pro whether your slab is a good candidate and what happens if the base keeps settling.
How resurfacing works
NRMCA says a repaired surface is only as strong as the surface it's bonded to. Weak or unsound material is removed first with a chisel, sandblasting, a high-pressure washer or a jackhammer. The clean, rough surface then gets a thin bonded resurfacing, such as portland cement concrete, latex-modified concrete or a polymer-modified cementitious overlay (NRMCA).
Preventing it from coming back
- Fix drainage so water and salt don't stand on the surface; NRMCA notes standing water greatly increases scaling (NRMCA).
- Use deicers sparingly, and never ammonium-based products.
- Ask about sealing, which NRMCA says is ideally done in late summer.
What affects the price
We don't quote prices; the pro who visits sets the price. These are the things that usually move a bid:
- Area and how much unsound concrete must come off
- Resurfacing versus section replacement
- Crack filling or leveling
- Sealing
Questions to ask your contractor
- What's causing the damage, in your view?
- Will a resurfacing overlay bond to this slab?
- Is replacement cheaper over the long run here?
Frequently asked questions
Can concrete be resurfaced?
Often, if the slab is structurally sound. A contractor checks for movement and wide cracks first.
Why does my concrete flake near the garage?
Salt and slush dripping from cars is a common cause. NRMCA recommends hosing off salt deposits, especially on newer slabs (NRMCA).
Will resurfacing hide cracks?
Thin overlays can cover surface damage, but structural cracks often reflect through. Ask the pro how they'll treat cracks first.
Ready to get matched?
Pick what you need and leave your contact info. An independent local pro gets in touch.
Related services and guides
Service areas
Sources
Checked November 2026. Rules change; confirm with the source.